RSO-Rick Simpson’s Cannabis Oil Recipe(cure for cancer, diabetes, chronic pain, etc.)

RSO-Rick Simpson’s Cannabis Oil Recipe(cure for cancer, diabetes, chronic pain, etc.) (As Requested) With How-To Instructions..
What is RSO? …
 
RSO = Rick Simpson Oil. RSO is a cannabis plant extract and technique that was reintroduced to the public by Rick Simpson so anyone could easily produce the oil for themselves. According to the directions in Rick’s video “Run from the Cure”, A solvent is used to do a quick wash of the dried bud material melting or extracting the essential plant oils into the solvent. The stripped plant material is then discarded. The solvent is then evaporated off (using a rice cooker or similar heating device) leaving the oil behind. The oil left behind is the RSO. What does RSO do? Our bodies have an endocannabinoid system which is responsible for regulation of many of our bodily functions. Our bodies also have the ability to produce our own cannabinoids, they are called endocannabinoids. In a healthy person everything works fine and the endocannabinoid production is enough to keep us healthy. If you are sick, have been injured, or live in a polluted area, chances are your endocannabinoid system cannot keep up with the demands put on it and needs help. The only way to help ourselves is to supplement our bodies with cannabinoids from somewhere else. Cannabinoids from the Cannabis plant. RSO is a very concentrated form of cannabinoids, that is why so many people experience such great improvements when using RSO. It tops off your ailing cannabinoid system with exactly what is needed to keep your body running like a well oiled machine. What diseases can cannabinoids help? It seems the medical community is seeing the beginnings of being able to study cannabis,it’s properties and health applications again. I hope so. Here are just a few conditions that science has proven cannabinoids are therapeutically active against: Arthritis Cancer Crohn’s Diabetes Fibromyalgia Multiple sclerosis Parkinson’s I’ve made the RSO so how do I take it and how much do I take? The different methods of using RSO have different effects as outlined below. Taking the oil orally and letting it melt in your mouth, not swallowing – Slower acting than smoking, faster than ingesting. Longer relief than smoking. Smoking, Vaping the oil – into the lungs and direct to the bloodstream. Very fast acting, short lived relief, 2-3 hrs approx depending on the strain and strength. Ingesting – 1 to 2 hours before you start to get relief but the effects can last 8 – 10 hrs. Through the gut into the liver where THC gets converted to the more psychoactive 11-hydroxy-THC by the liver. How much to start with? If you are fighting cancer or other life threatening disease Rick Simpson recommends ingesting 60 grams over a 90 day period to start. For non life threatening, start small. I repeat, start small as RSO is a concentrate. Getting your dose correct can be difficult. Different strains, different tolerances, even different batches of oil. What if I take too much? Don’t worry, you can’t die from taking too much, it is impossible because unlike opiates there are no cannabinoid receptors in the part of your brain that are responsible for your automatic baseline functions like making your heart beat, and breathing. So if you do take too much just rest easy and enjoy the ride, there is nothing to worry about. How much is 1 dose? When I make the RSO I draw the finished product up into a 1 ml syringe (btw 1 ml = 1 gram) because it is easy to handle and because the markings on the syringe let me get a repeatable dose. Using a 1 ml syringe I would recommend you start with just 1 lines worth (there are 50 lines on a 1 ml syringe). I know that doesn’t sound like much but you need to establish what your tolerance is. If the 1 line had no effect then try 2 lines. Just remember that if you ingest the RSO it can take a couple of hours to start having effects that you would notice. The process of making RSO: Starting material: I generally work with a pound or more of good grade hemp starting material. You can use just one ounce. An ounce will usually produce 3 or 4 grams of oil. The amount of oil produced per ounce of hemp will vary from strain to strain, but it all has that wonderful healing power. 1 – Place the completely dry starting material in a plastic bucket.
2 – Dampen the material with the solvent you are using. Many solvents can be used. I like to use pure naphtha but it costs $500 for a 45-gallon drum. You can use 99% isopropyl alcohol, which you can find in your local drug stores. Alcohol absorbs more chlorophyll from the plant material than naphtha does. This gives oils made with alcohol a darker colour but does not diminish the potency of the oil to any noticeable degree. Ether, naphtha or butane and many other solvents can produce oils that are amber and transparent. Granted these clear oils do look better but dark oil can be just as potent. If the process is done properly, little or no solvent residue is left in the oil. I have been consuming oils produced using different solvents for eight years with no harmful effects. You will require about two gallons of solvent to strip the THC off one pound of dry starting material. 500 milliliters of solvent should be more than enough to strip the THC from one ounce of hemp starting material.
3 – Crush the plant material using a stick of clean untreated (chemical free) wood or some such device. Even though the starting material has been dampened with the solvent, you will find that the material can be readily crushed.
4 – Add solvent until the starting material is completely covered. Use the stick to work the plant material. As you are doing this, the THC dissolves off the plant material into the solvent.
5 – Continue this process for about 3 minutes.
6 – Pour the solvent-oil mix off the plant material into another bucket. You have just stripped the plant material of about 80% of its THC.
7 – Second wash – again add solvent to the plant material and work it for another 3 minutes to get the other 20%.
8 – Pour this solvent-oil mix into the bucket containing the first mix that was poured off previously.
9 – Discard the twice-washed plant material.
10- Pour the solvent-oil mix through a coffee filter into a clean container.
11- Boil the solvent off. I have found that a rice cooker will do this boil off very nicely. The one I have has two heat settings – high and low – and will hold over a half gallon (2.5 liters) of solvent-oil mix.
12- Add solvent-oil mix to the rice cooker until it is about ¾ full. Make sure you are in a very well ventilated area and set up a fan to carry the solvent fumes away. The fumes are very flammable. Be sure to stay away from red-hot elements, sparks, cigarettes etc. that could ignite the fumes.
13- Plug the rice cooker in and set it on high heat.
14- Continue adding solvent-oil mix as the level in the rice cooker decreases until it is all in the cooker. 15- Add a few drops of water to the solvent-oil mix as the level comes down for the last time. The amount of water added depends on how much starting material you had in the beginning. If I am producing oil from a pound of good bud, I usually add about ten drops of water.
16- When there is about one inch of solvent-oil-water mix left in the cooker, put on your oven mitts, pick the unit up and gently swirl the contents.
17- Continue swirling until the solvent has been evaporated off. The few drops of water help release the solvent residue and protect the oil somewhat from too much heat. When the solvent has been boiled off, the cooker that I use automatically goes to low heat. This avoids any danger of overheating the oil. At no time should the temperature of the oil go over 290F degrees (140 C).
18- Put on your oven mitts and remove the pot containing the oil from the rice cooker.
19- Gently pour the oil into a small stainless steel container.
20- Place this container in a dehydrator or put in on a gentle heating device such as a coffee warmer. It may take a few hours but the water and volatile turpines will be evaporated from the oil. When there is no longer any activity on the surface of the oil the medicine is ready for use.
21- Pour the hot oil into a bottle; or as in the video suck it up into a plastic syringe. Putting the oil in a plastic syringe makes it very easy to dispense the medicine.
 
Now you have RSO-Cannabis Oil….!!!
Advertisements

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s